🖨️ Print Shop
Tea bag dispenser

Mounting options.

1. Four 10x3mm or 3/8x1/8inch disc magnets. Put a small drop of super glue under each magnet.

2. Two #4 flat head wood screws don’t over tighten.

3. Double sided tape.

4. Command strips.

Alternate each tea bag 180 degrees front to back when loading into the dispenser.

Enjoy.

Update 02/12/2025: Just added a thinner walled and bigger bottom cutout version “Tea bag holder thin”. Plenty strong enough with less material.


 

Tea bag dispenser

by gkmakeit · original on Printables ↗

Household / Kitchen

♥ 2.2k⬇ 5.4k🖨 68 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗holderbagsteadispenser

Print profiles

  • Tea bag holder.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Tea bag holder thin.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print