I got bored while it dumped snow outside, so I made a snow shovel. Now you can print your own too! It just might take a while to clear your driveway though…

Mini Snow Shovel Shoveling Snow:
https://youtube.com/shorts/9XE37P-_dC8?feature=share

This is a small model with moderately thin features and a tiny footprint for the print bed.
I recommend:

• Printing at 0.10mm layer height
• Printing with supports (I've included two different orientations with organic supports)
• If you want a strong handle (the broom stick of the snow shovel), then print it on its side with organic supports. (I've labeled the included gcode with the word SIDE)