Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer.
Printed on Bambu Lab X1 CC.

Watch the videos first at the bottom, at the end of the description.
If there is news about the model, you will find out there first.

The model is available for free download and use.
If you still want to invite me for a coffee for my effort, troubles and time (I ran out of filaments a couple of times), you can do it via:

https://paypal.me/mikloskiszely

Please use always bed leveling & flow calibration for this model, especially for the gears and axles!
Bambu Lab P1 should at least be calibrated. (linear advance)

I uploaded some print suggestions as *.3mf files.
(5 print plates for Bambu Lab / Bambu Studio with PEI plate @ the end of the list - attention, not cold plate)

Update:
I tested the "maschine" again and again and it happened to me too: the 45 mm axle (the driven one) broke!
The 3 walls and 25% infil are not enough!

If you haven't printed it yet or broke it, then please print it with:

0.16mm Optimal @BBL profile
5 or more wall loops
100% infill (sparse infill density)
Rectilinear (sparse infill pattern - set automatically)
speed outer wall (slow as possible for more accuracy) e.g. max 60 mm/s
support (yes) normal (auto)

Update 2:
If the stronger printer settings for Axis 45mm are not enough, the you can also print the “Heavy Load” version (see folder “Heavy Load Parts”)

Centering discs:
If you need a special size, you can decrease or increase the next size in the slicer program.
E.g. if you need 51.5 mm, then you can take the 50 mm disc and scale up accordingly before printing.
(51.5 / 50 = 1.03, i.e. print 3% larger)

Reference print settings for:

Winder Spool Holder Main Body
Donor Spool Holder Frame
Winder and Donor Right Hand Spool Axle Nut
Donor Spool Holder Axle without Gear
all Spooler Centering Discs (50/55/60/65 mm)

Settings:

0.20mm Standard @BBL X1C Profile
+custom settings:
Wall loops: 3
Outer wall: 60 mm/s
Infill 25 %
if you need support, don't do it at the vertical ball bearing openings
support can be used under the filament carriage holder and under the lower ball bearing for the filament sled. (paint it manually)

Print settings for:

all Gears
all shafts / axis (except the driven one 45 mm, see above)
handle or drill adapter parts
all washers
and all Filament Guide parts

Settings:

0.16mm Optimal @BBL X1C
Wall loops: 3
Outer wall: 60 mm/s
Infill 25 %
no support needed, except:
all axis with hexagon

please print all parts (gears, axis) horizontally, except:

Winder Right Hand Spool Axle with Gear 25 teeth or the Heavy Load version
Winder and Donor Right Hand Spool Axle Nut
Gear Worm
Rotary handle - twist grip - axis
Rotary handle - twist grip - knob
Donor Spool Holder Axle without Gear

Multiple Prints:

all centering disc's 2x per spool
4 x Washer 3.0 x 8.5 mm
2 x Gear with 50 teeths

Additions parts:

7 x 608 bearing
12-15 cm PTFE tube
4 x M3 hexagon socket screw (optional, you can also glue the filament guide & sled)

Have Fun!

Assembly Instructions:

…and how it works:

And troubleshooting (if you have any):

If you have still trouble with the original driven 45mm axis, print the Heavy Load Parts:

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

by Miklos Kiszely · original on Printables ↗

3D Printers / Accessories

♥ 18.9k⬇ 116.5k🖨 822 prints

License: Creative Commons — Attribution — Noncommercial ↗spoolrewinderfilamentspoolholderwinderbambulab

Print profiles

Handle main body Heavy Load.stlIN STOCKDEFAULT
⏱ 24m · 9 g · 90 × 25 × 32 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
Gear linear for filament carriage.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rotary handle - twist grip - main body with hexagon.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Adapter hexagon for electric drill.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rotary handle - twist grip - axis.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rotary handle - twist grip - cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rotary handle - twist grip - knob.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Winder and Donor Right Hand Spool Axle Nut.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Donor Spool Holder Frame.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw knob M3 x 6.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Donor Spool Holder Axle without Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gear Worm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gear with 50 teeths.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gear 25 teeth.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gear 60 teeths Filament Guide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Washer 4.1 x 8.5 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spooler Centering Disc for foreign Spools 60 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Washer 3.0 x 8.5 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spooler Centering Disc for foreign Spools 65 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Washer 2.0 x 8.5 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spooler Centering Disc for Bambu Lab Spools 55 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Washer 7.6 x 8.5 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spooler Centering Disc for foreign Spools 50 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Filament Guide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Filament Guide Carriage.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Filament Guide Sled.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Axis 88 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Axis 47 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Axis 45mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Axis 20mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Axis 39 mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Winder Right Hand Spool Axle with Gear 25 teeth.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Winder Spool holder main body.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Print plate Donor Spool Holder.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Print plate Axis Washers handle.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Print plate Center Discs and Spool Axis and Nuts.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Print plate Gears.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Print plate Winder and Carriage.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stronger 45mm Axis with 5 walls and 100% infill.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Axis 47 mm no slip version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Gear 60 teeths Filament Guide no slip version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
45mm Axis driveless.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Adapter hexagon for electric drill Heavy Load.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Heavy Load plate 2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Winder Spool Holder Axle Geared heavy load.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Heavy Load plate 1.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print