I was making a custom pick for someone, and thought I'd share the basic pick with you all. Pretty much does what it says on the tin - a simple, cheap, fast pick with filleted edges. There are loads of other designs out there which all offer pretty much the same, but maybe someone will find this useful!

I printed it on pretty high quality (0.12mm with ironing). Probably doesn't need that, but considering I'm relatively new and it's a small product, I didn't mind spending the extra few minutes. I would recommend printing with 100% infill, though - haven't tried with anything else, however I'd imagine it wouldn't feel as sturdy.

This is my first self-designed 3D print (not claiming to have reinvented the guitar pick, but first print I've not borrowed from someone else), and first time using Fusion360, so any pointers or constructive criticism are more than welcome!

Print info for picture attached:

Printer - Ender 3 V2 (0.4mm nozzle)

Layer size - 0.12mm

Infill - 100%

Filament - Sunlu Grey PLA (1.75mm)

Ironing enabled

Slicer - PrusaSlicer