Just another flower pot. Geometry was created using a parametric model in Rhino/Grasshopper. The model is solid and is intended to be printed in vase/spiral mode. Two versions are included: one is completely closed and the other one has a hole on the bottom.

Dimensions:

diameter at the top: 116mm
diameter at the bottom: 84mm
height: 90mm.

Print Settings

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2 mm / 0.3 mm

Infill:

no, use vase/spiral mode

Filament:

generic PLA

Notes:

Default settings with a 0.2/0.3mm layer height should work. Activate vase or spiral mode in your slicer. Supports are not needed.

Twisted flower pot

by alecs.form · original on Printables ↗

Household / Home Decor

♥ 752⬇ 4.4k🖨 56 prints

License: Creative Commons — Attribution — Noncommercial ↗vaseparametricgeometricspiralvasemodemathspiralvaseflowervasethingiversetwistedvasegrasshoppergeometricalcomputationaldesigngrasshopper3d

Print profiles

230215_twisted-flower-pot_closed.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
230215_twisted-flower-pot_hole.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print