BEST PRINTED WITH PETG
I modelled this in Blender while making sure it can function when printed.
All you need is glue to glue the two hinge parts together while inside the handle and blade.
It should take around 4-5 hours for 100% infill at 60 mm/s speed and .2 mm layer height
I also recommend you print this facing upward for the best quality. Make sure you are using a raft if you don't have the best bed adhesion
I left room inside the handles for foam or any other dampening material.
This is heavily inspired by Squid industries “Squiddy” and Glidrs “Arctic” balisong trainers.
Flippy Friendly Butterfly Knife Balisong Trainer {NO SCREWS NEEDED!}
by Exlipsis · original on Printables ↗
Gadgets / Other Gadgets
♥ 247⬇ 5.1k🖨 21 prints
Print profiles
FlippyHinges.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
FlippyHandles.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
FlippyBlade.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print