Watch it turn:
Post-Printing
Use a flathead screwdriver to free the base from the rotating collar. Gently work around the full perimeter to lift the collar from the base. After freeing the collar, free the threads by twisting back and forth on the collar while holding the base. After working through a few complete cycles open and closed the box with loosen up and rotate freely.
Trim Tab version
If printing the trim tab version you will need to cut all of the tabs on the top and bottom to free the pedals before freeing the collar above.
Blooming Heart Box
by Mr Prints · original on Printables ↗
Tabletop Miniatures / Props & Terrains
♥ 103⬇ 648🖨 5 prints
Print profiles
CE3_VALENTINES_TWIST_BOX_ASSEMBLY.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CE3_VALENTINES_TWIST_BOX_ASSEMBLY_-_TRIM_TABS.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print