The containers are designed to be used independently or with Gridfinity baseplates. The bottom has magnet holes for magnetized Gridfinity baseplates.
The containers when fully loaded are stackable.
The battery model number is printed on the outsides and the insides whenever feasible.
The design tries to find the best trade-off between container's capacity, usability, stackability and robustness.
Gridfinity specifies container sizes with atomic increments of 42mm for the width (X) and the depth (Y), of 7mm for height (Z). For instance, a 1x2x4 Gridfinity container has sizes of 42mm x 84mm x 28mm.
For large batteries, the following dimensions are available (1x1, 2x1 and 2x2).
When the battery is too tall, there is also a low clearance version. This is intended to fit in shallow drawers.
1x1 and 2x1 containers can stack on top of most 2x2 containers. If that is not the case, you may use these stackable baseplates by Akio (thanks @avx for suggesting the idea).
For cell batteries, there are 2 container sizes: 1x1 and 2x1.
Let me know:
- if you cannot find a container for your battery type,
- if you encounter a fitting or usability problem,
- if you have any suggestions.
List of containers
Meaning of filename: ModelName - xNN - grid XYZ - vR.r
where:
- NN is the capacity
- X is the X width gridfinity block count (multiply it by 42mm to get the size)
- Y is the Y width gridfinity block count (multiply it by 42mm to get the size)
- Z is the height grdifinity block count (multiply it by 7mm to get the size)
- R.r is the version number
| Battery Type | Capacity | Gridfinity Size |
|---|---|---|
14250 aka CR14250 & ER14250 | 5 | 1x1x5 |
| 10 | 2x1x5 | |
| 24 | 2x2x5 | |
| 18500 | 4 | 1x1x8 |
| 8 | 2x1x8 | |
| 16 | 2x2x8 | |
| 18650 | 2 | 2x1x4 |
| 4 | 1x1x10 | |
| 4 | 2x2x4 | |
| 8 | 2x1x10 | |
| 16 | 2x2x10 | |
| 21700 | 2 | 1x1x10 |
| 3 | 2x2x4 | |
| 4 | 2x1x11 | |
| 9 | 2x2x11 | |
| ½AA | 4 | 1x1x5 |
| 10 | 2x1x5 | |
| 24 | 2x2x5 | |
| 9V | 2 | 1x1x8 |
| 5 | 2x2x5 | |
| 6 | 2x1x8 | |
| 12 | 2x2x8 | |
A23 aka 1181A, 144, 23A, 23AE, 3LR50, 8F10R, 8LR23, 8LR932, A23S, CA20, EL12, E23A, GP12A, GP23, GP23A, K23A, L1028, LR23A, LRV08, MN21, MN23, MS21, P23GA, RVO8, VR22, V23GA | 9 | 1x1x5 |
| 21 | 2x1x5 | |
| 48 | 2x2x5 | |
A27 aka GP27A, MN27, L828, 27A, V27A, | 16 | 1x1x5 |
| 36 | 2x1x5 | |
| 80 | 2x2x5 | |
| AA | 5 | 1x1x8 |
| 10 | 2x1x8 | |
| 24 | 2x2x8 | |
| AAA | 9 | 1x1x7 |
| 21 | 2x1x7 | |
| 36 | 2x2x7 | |
| AAAA | 16 | 1x1x7 |
| 32 | 2x1x7 | |
| 64 | 2x2x7 | |
| B | 1 | 2x1x4 |
| 2 | 1x1x10 | |
| 3 | 2x2x4 | |
| 4 | 2x1x10 | |
| 12 | 2x2x10 | |
| C | 1 | 1x1x8 |
| 3 | 2x1x8 | |
| 4 | 2x2x5 | |
| 8 | 2x2x8 | |
CR2 aka 15270, 15266, CR15H270, 5046LC | 5 | 1x1x5 |
| 10 | 2x1x5 | |
| 19 | 2x2x5 | |
CR123A aka CR123, 123, 123A, 16340, 17345, 2/3A, BR2/3A, CR17345, CR23, DL123A, EL123A, K123LA, L123A, SF123A, VL123A | 4 | 1x1x6 |
| 8 | 2x1x6 | |
| 16 | 2x2x6 | |
| D | 1 | 1x1x10 |
| 1 | 2x1x6 | |
| 2 | 2x1x10 | |
| 2 | 2x2x6 | |
| 5 | 2x2x10 | |
N aka LR1, MN9100, AM5, GP910A | 9 | 1x1x3 |
| 18 | 2x1x3 | |
| 36 | 2x2x3 |
For CRxxxx, AGx and LRxx button cell holders, please go to these posts:
CRxxxx Button Cell Battery Holders (Gridfinity, Stackable, Labelled)
AGx Button Cell Battery Holders (Gridfinity, Stackable, Labelled)
LRxx Button Cell Battery Holders (Gridfinity, Stackable, Labelled)
Credits:
These works were based upon:
Zach Freedman's initial designs of Gridfinity.
"Gridfinity: Your Ultimate Modular Workshop is FREE!"
Gridfinity Unofficial Community
Overkill Gridfinity Baseplate by Kyle Warren
These works are written using:
Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled)
by xavierly · original on Printables ↗
Hobby & Makers / Organizers
♥ 946⬇ 4.9k🖨 69 prints
Print profiles
14250 - x05 - grid 1x1x5 - v2.0.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
14250 - x10 - grid 2x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
14250 - x24 - grid 2x2x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18500 - x04 - grid 1x1x8- v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18500 - x08 - grid 2x1x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18500 - x16 - grid 2x2x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18650 - x04 - grid 1x1x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18650 - x02 - grid 2x1x4 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18650 - x16 - grid 2x2x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18650 - x08 - grid 2x1x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
18650 - x04 - grid 2x2x4 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1-2AA - x04 - grid 1x1x5 - v.2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1-2AA - x10 - grid 2x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1-2AA - x24 - grid 2x2x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
9V - x02 - grid 1x1x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
9V - x06 - grid 2x1x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
9V - x05 - grid 2x2x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
9V - x12 - grid 2x2x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
A23 - x09 - grid 1x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
A23 - x21 - grid 2x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
A23 - x48 - grid 2x2x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
A27 - x16 - grid 1x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
A27 - x36 - grid 2x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
A27 - x80 - grid 2x2x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AA - x10 - grid 2x1x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AA - x05 - grid 1x1x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AA - x24 - grid 2x2x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAA - x36 - grid 2x2x7 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAA - x21 - grid 2x1x7 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAA - x09 - grid 1x1x7 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAAA - x64 - grid 2x2x7 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAAA - x16 - grid 1x1x7 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAAA - x32 - grid 2x1x7 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
B - x01 - grid 2x1x4 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
B - x12 - grid 2x2x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
B - x02 - grid 1x1x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
B - x03 - grid 2x2x4 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
B - x04 - grid 2x1x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
C - x03 - grid 2x1x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
C - x08 - grid 2x2x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
C - x01 - grid 1x1x8 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
C - x04 - grid 2x2x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CR2 - x05 - grid 1x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CR2 - x10 - grid 2x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CR2 - x19 - grid 2x2x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CR123A - x08 - grid 2x1x6 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CR123A - x04 - grid 1x1x6 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CR123A - x16 - grid 2x2x6 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
D - x01 - grid 2x1x6 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
D - x02 - grid 2x1x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
D - x05 - grid 2x2x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
D - x02 - grid 2x2x6 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
D - x01 - grid 1x1x10 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
N - x36 - grid 2x3x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
N - x09 - grid 1x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
N - x18 - grid 2x1x5 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GB - x06 - grid 1x1x4 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
GBA - x12 - grid 1x1x3 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
21700 - x02 - grid 1x1x11 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
21700 - x09 - grid 2x2x11 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
21700 - x03- grid 2x2x4 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
21700 - x04 - grid 2x1x11 - v2.0.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print