Intro
This is a simple case/holder/cover for Yubikey 5 series USB A and USB C.
Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key!
Info
It can be printed without supports. I printed it with 0.12 layer height and 40% infill, 3 walls with Nylon for better strength. For sure it can be printed in PLA, PETG and others.
The case rely on hole of the Yubikey so you won't loose your key in case of a case damage.
The clearances are important.
I found that 0.25mm from each side for the key hole side gives good results.
0.1mm from each side of the port side assures that key will fit there firmly and won't eject by itself.
For your printer, you may have to scale the model a bit. Or edit the included .step files to suit your needs.
All walls are 2mm.
Options
I also included version with name, i.e. is it a USBC or a USBA version.
Yubico YubiKey 5 Series Case Cover for USBA and USBC
by Exmantion · original on Printables ↗
Gadgets / Portable Devices
♥ 36⬇ 657🖨 4 prints
Print profiles
USB_C cover.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
USB_A cover name.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
USB_C cover name.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
USB_A cover.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print