🖨️ Print Shop
Slightly Over Engineered Trash Bag Roll Holder

https://www.buymeacoffee.com/maxt

----------------------

2 versions in one package:

  1. Without a recycle logo on the side
  2. With a recycle logo on the side


Why should you use this model and not the others?

  • It won't break, ever (as long as you use it for the trash bag rolls)
  • The bag roll will never fall out through one of the sides
  • The bag roll is very easy to pick up
  • Enough extra spacing to fill a 60mm Ø bag roll without a problem, but you can resize the model as you please to fit bigger bag rolls
  • Can be used to accommodate any length of the bag rolls by simply spacing the left and right sides out as needed (I suggest adding an extra 0,5cm on each side of the bag roll)
  • Can be mounted using double-sided tape or screws
  • Because you've just spent a minute reading the reasons why to use this particular trash bag roll holder and not the others. If you're still here, we know you mean business - you need a solution that just works. This holder got you covered!


The model will fit on Prusa Mini+ (180x180)
Feel free to size it up or down as you wish


Print: 0.2-0.3mm
Nozzle: 0.4mm
Perimeters: 3 (much more important vs infill percentage!) 
Support: Not required
Brim: Not required
Infill: 15-30%
Fill pattern: Support Cubic


Happy Printing!

--------------

https://www.buymeacoffee.com/maxt

Slightly Over Engineered Trash Bag Roll Holder

by MaxT · original on Printables ↗

Household / Kitchen

♥ 15.4k⬇ 33.4k🖨 621 prints

License: Creative Commons — Attribution — Noncommercial ↗holdertrashcangarbagetrashgarbagebagholdertrashbingarbagedisposalgarbagebagtrashbagtrashbaghooktrashbagholdergarbagebinholder

Print profiles

  • Slightly Over Engineered Trash Bag Roll Holder, Left with Recycle logo, by MaxT.3mfIN STOCKDEFAULT

    ⏱ 34m · 20 g · 88 × 65 × 40 mm · 1 material(s)

    Prints on: A1 mini 0.4PLA

    Order this print

  • Slightly Over Engineered Trash Bag Roll Holder, Left, by MaxT.3mf

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Slightly Over Engineered Trash Bag Roll Holder, Right with Recycle logo, by MaxT.3mf

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Slightly Over Engineered Trash Bag Roll Holder, Right, by MaxT.3mf

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print