Tired of your charging cables laying all over the place, tripping over them at night?  Why are you in the garage in the dark, at night??

The ⚡EV Charger Holder J1772⚡ is designed to hold an at home Level 2 EV charging plugs and cables nicely on the wall.

*NOTE: I have tested this with my General Motors Level 2 J1772 charger. Some designs may vary, so please let me know if you have any questions or have suggested adjustments.

FEATURES:

• Compact Design
• 2 screws stacked vertically for stud mounting
• Also holds the cable
• Also makes a great coat hanger

UPDATES

11/21/2023
• Increased opening Diameter by 1mm for better clearance across variable sizes of J1772 chargers. (Thank you for the feedback everyone)
• Increased height of cable holding tab slightly

HARDWARE

• Screws: x2 wood self tapping countersunk screws
• Screw Driver / Power Drill
• Stud Finder

INSTALLATION

• I recommend installing the holder onto a wall stud if possible, otherwise use wall anchors to a solid hold.

• Hold the holder and screw the screw lol. Start with the top screw, adjust the hangers angle if needed, and install the lower screw.

PRINT SETTINGS
Filament: PETG
Nozzle Size: 0.4mm (3 perimeters), 0.6mm (2 perimeters)
Print Height: 0.2-0.35mm
Infill: 10-20%

MORE FROM MY WORKSHOP

This holder comes from the same workshop as the GEN2 Modular Storage System · a free 3D printable storage system with swappable drawers, cases, covers, and wall mounts. The free GEN2 Planner lets you design a full setup in 3D and hands you the exact print list: gen2planner.jerrari3d.com

SUPPORT MY DESIGNS

My designs are free. If they save you time or space, you can support the project by joining the Jerrari Club (CAD and STEP files, early access, premium drops) or picking up a premium faceplate collection · it means a lot and directly fuels new designs.

• Jerrari Club: Join here
• Premium faceplates: Decor Faceplate Collections