You need to print this 4 times. Position the extruded sides to the outsided where the screws for the drawer mechanism are. It's a perfect fit but a bit of superglue wont hurt.
The Grid is 14x10 and up to 8 height on the smaller drawer and 10 height on the Larger bottom ones.
The side clearance is enough so you wont touch the sidescrews with any normal size drawer.
The last 3 grids on the back are not easy to reach and not reachable from the top so i suggest using them for “deep storage”.
The Printable file is designed for a Voron with a 350mm Baseplate. If you need it cut in a different way for smaller Baseplates let me know.Â
IKEA ALEX (wide) Gridfinity Baseplate
by Mino · original on Printables ↗
Hobby & Makers / Organizers
♥ 482⬇ 2.6k🖨 30 prints
Print profiles
IKEA ALEX Gridfinity Baseplate x4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA ALEX Gridfinity Baseplate Side x4 (for Prusa type machines).3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA ALEX Gridfinity Baseplate Middle x2 (for Prusa type machines).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print