U will need:
- Case - M2.5x10 self tapping screws X8
- Pi - M2.5x6-8 self tapping screws X4
- Mounting Case - M5x10 BHCS or SHCS X2-4
- 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4
No supports are needed for this design.
Red faces can be removed for wire/ribbon access (see 3MF)
As with all my designs, I'm open to suggestions..
Raspberry Pi 3 B + Case
by Squirrelbrain · original on Printables ↗
Hobby & Makers / Electronics
♥ 982⬇ 4.9k🖨 74 prints
License: Creative Commons — Attribution — Noncommercial — Share Alike ↗caseenclosurepiraspberrypiraspberrypicaseraspberrypi3rpi3case
Print profiles
Pi_3_B_+_NO_FAN.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pi_3_B_+_CASE.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print