This model is now outdated. Check out V2 here!

-----------------------------------------------------------------

Retro TV case based on a Toshiba Blackstripe I made for a Raspberry Pi 3B to run RetroPie and play cartoons. Designed to fit a Pi 3B with a 3.5 inch HDMI MPI3508 LCD display.

In addition to the print you'll need:

Raspberry Pi 3B (might fit Pi 4 but I haven't tested)
3.5 inch HDMI MPI3508 LCD display with HDMI crow connector (such as this one)
Right angle micro-usb adapter (such as these) to allow power cable to be connected from the back of the TV. Pi 3B uses the “down” version.
SD card with RetroPie (or whatever you want to run)
4x M2.5x5 screws for the shell
2x M2.5x8 screws for the antennae
2x M2.5x8 screws for the base

Optional:

30mm 5V fan (such as this one)

All parts except base, pi_case, and viewport should be printed with supports. The front is printed as multi-material.

RetroPie Notes:

I used the following values in my /boot/config.txt to reduce the display output to 4:3.
overscan_left=-10
overscan_right=65

CHANGE LOG

Feb 13 2023

Added bracing tab for USB adapter to Base.

Feb 3 2023

Added speaker gaps to Front grill.

Feb 1 2023

Added 30mm fan mountable version of Back.
Added channel gap in Pi Case for fan wires.
Cut left side corners off Viewport for better fit.

---------------------------------------------------------------------

Have fun!

Retro TV Raspberry Pi case

by fantasticmrdavid · original on Printables ↗

Gadgets / Computers

♥ 181⬇ 522🖨 2 prints

License: Creative Commons — Attribution ↗retroretrogamingraspberrypiraspberrypicaseretropieraspberrypi3retropiecasetelevision

Print profiles

antenna.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
base.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
shell.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
antenna_base.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
back.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
viewport.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
pi_case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
front.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
base.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
back_fan_mount.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print