Model description
The Boeing 787 is a wide-body, twin engine jet manufactured by Boeing. The 787 is Boeing's most modern and fuel efficient aircraft. It was the first aircraft to rely heavily on composite materials as they make up 50 percent of the primary structure, including the fuselage and wing.
The engine nacelles with their chevron exhaust, reduce the noise levels both outside and inside the cabin, by up to 60%. The aircraft also features raked wingtip to further improve the fuel efficiency. The windows are more than 30 percent larger than those on most similarly sized airplanes.
The first 787 was officially delivered to All Nippon Airways (ANA) on the 25th of September in 2011 at the Boeing Everett factory.
Model dimensions
- Length: 39,7 cm
- Wingspan: 42 cm
Print settings
- Layer height: 0,2mm
- Outer walls/perimeters: 2
- Bottom layers: 3
- Top layers: 5
- Infill: 0% (except for the stand: 25%)
- No supports
- Minimum layer time: 5 sec
- Perimeter generator: classic (not arachne)
Minimum required print volume is 61x80x199*mm for the 787-8.
*For printers with a Z-axis shorter than 250mm, use the the split verion of the wing.
Please use the following link if you have questions or issues related to this model: https://discord.gg/GK6GNpN4eg
Additional content
- 787-9: https://ko-fi.com/s/b45937976b
- 787-10: https://ko-fi.com/s/3fab61a92e
Support
If you like my models, you can support my work in the following ways:
- Make a donation or buy something from my shop: https://ko-fi.com/clerx
- Become a member of the Clerx Discord community: https://discord.gg/hckHHs3waH
Boeing 787-8 - 1:144
by CLERX · original on Printables ↗
Toys & Games / Vehicles
♥ 542⬇ 4.7k🖨 30 prints
Print profiles
Horz Stab - Right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Horz Stab - Left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Engine 1 - Left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Engine 2 - Right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Fuselage Aft.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Fuselage Fwd.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Vert Stab.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Right - Flexed.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Left - Flexed.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Fan Blades.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Fuselage - Pin.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stand.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Right - Inner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Left - Inner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Right - Outer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Left - Outer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Left - Flexed - Inner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Left - Flexed - Outer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Right - Flexed - Inner.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wing Right - Flexed - Outer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print