A redesign of my original D20 Cookie Cutter that incorporates the stamp into one piece and a cutter into the other. There are two separate objects included in the file. They will print in place, so both objects can be centered on the build plate, but you can also separate them on the build plate. You'll have to orient them because I haven't been able to figure out how to save meshes from F360 so that they automatically center in the slicer.

This redesign is to leave a bit of cookie around the outside of the stamped lines. My wife likes to add icing to the cookies and the intention is to flood the lines and numbers with one color icing and then flood the rest with a different color. You can stamp first and using the stamp as a locator, slide the cutter over it, or vice versa - cut first and insert stamp into cutter to center it properly.