Dec 17, 2022
Please read the entire description before downloading!
This is a pillbox with 7 compartments for the whole week.
Approximately 20mm x 20mm x 136mm in size.
For the hinge I use a piece of filament with ø1,75mm that is about 1cm longer than the box. After printing, the holes must be drilled out with a 2 mm drill. The filament is pushed through the box and all the lids and then slightly melted at the ends. Ideally, just enough to fit into the small recesses.
November 15, 2024, Complete overhaul:
The files and file names were very chaotic in the meantime, so I completely reorganised and renamed the models.
I also created a double version, e.g. for taking tablets in the morning and evening.
All boxes are now available in heights of 20mm (standard), 30mm and 40mm.
The lids are available with the abbreviations for the days of the week in German, English and Spanish.
All lids fit all boxes.
All models are available as stl, step and x_t (Parasolid).
December 19, 2024
Added some lids for a french box:
Pillendose Deckel Ma
Pillendose Deckel Me
Pillendose Deckel Je
Pillendose Deckel Ve
Together with the already existing lids you can now print a french pillbox :)
December 23, 2024
Again a correction, I'm sorry!
Don't know how this could happen, but higher versions 30mm and 40mm did not fit to the lids, now I have corrected them and uploaded again, sorry.
Now really the lids fit to all sizes of the base parts.
January 24, 2025:
There were still wrong lids in the step files, I must have overlooked them. But now I've corrected them.
December 01, 2025:
Sorry, I had to correct the lids again; the German lids did not match the lids in other languages.
The German texts are from my single box, all texts in other languages are from the double box.
The lids are the same size, but because of the thicker partition wall, they were shifted by 1 mm—the texts, however, were not. Hence the difference.
Since there are always lids with the same text for different languages, they don't fit together – see comment from ‘P P’: https://www.printables.com/model/352892-pillenspender-pill-dispenser/comments/3019013
I have corrected the texts on all non-German lids so that they are now all aligned in a single line. Sorry for the inconvenience.
December 23, 2025:
At the request of Zaffero (https://www.printables.com/@Zaffero_105185), I added a lid with the text "GI" so that the pill box can also be printed in Italian.
February 1st, 2026:
Added a blank lid and made minor corrections on the lids.
There is no need to replace or reprint lids that have already been printed.
Please take a look at this as well:
https://www.printables.com/model/352893-pillenspender-pill-dispenser-v2
Almost the same box with modified lids to use with transparent material.
Print Settings
Supports: No
Resolution: 0,20mm
Infill: 40%
Filament: PLA
Pillenspender-Pill Dispenser
by Findusdwarf · original on Printables ↗
Household / Other House Equipment
♥ 159⬇ 1.7k🖨 19 prints
Print profiles
Pillendose 20mm Woche-1x-Box.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Woche-20mm-2x-Box.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose 30mm Woche-1x-Box.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose 40mm Woche-1x-Box.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose 30mm Woche-2x-Box.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose 40mm Woche-2x-Box.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Je.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Ju.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Lu.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Ma.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Ve.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Me.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Mo.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel So.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Th.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Su.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel We.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Vi.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Mi.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Sa.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Fr.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Gi.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Do.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Tu.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Di.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pillendose Deckel Blank.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print