There are two models, one with teeth and one without. I recommend the model with teeth. This will prevent slippage of the straps.
Update 28SEP2018: I uploaded a strap keeper to hold the straps together.
Although it looks very similar to the original model, this is a complete redesign. I made some changes that suited me better. It has less play and self-centers when clicking the parts together. I also made the button smaller, although it's just as easy to use.
The buckle is self-tightening. The harder you pull it apart, the more engaged the locking mechanism becomes. Under load, it will not slip apart unless it catastrophically fails.The engagement has a very satisfyingclick when you connect the two parts together.
You could also use this as a belt buckle.
I have uploaded two models for each part. The only difference is the strap hole sizes. Most people will probably use the large size.
I printed these at 80% scale which produce a strap hole width of 21mm.
Native size produces a strap hole width of 27mm.
Please post your makes and comments!
Check out my other designs https://www.thingiverse.com/mistertech/designs
Print Settings
Printer:
Hatchbox Alpha
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
30% (probably doesn't matter)
Notes:
At 80% scale, it took 41 minutes to print a set.
Category: Replacement PartsStrap Buckle (No Supports)
by Mistertech · original on Printables ↗
Household / Other House Equipment
♥ 358⬇ 1.9k🖨 30 prints
Print profiles
Strap_keeper.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Strap_Buckle_Female_25mm_strap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Strap_Buckle_Male_25mm_strap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Strap_Buckle_Female_Large.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Strap_Buckle_Male_Large.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Strap_Buckle_Female_Large_with_teeth.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Strap_keeper_25mm_strap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Strap_Buckle_Male_Large_with_teeth.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print