This model is design to be printed using a 0.6mm nozzle (0.4mm should be fine) in vase mode.
The print above is made from Prusament PLA Gentleman Grey
Recommended settings
- Material : PLA / PETG
- Vase mode
- Layer height : 0.2 - 0.4 mm
-----
Want to support my work ? Check the following link ;)
Donations : http://www.paypal.me/redarhd
Wavy Pencil Holder - Vase mode
by SNASA · original on Printables ↗
Household / Office
♥ 3.9k⬇ 22.8k🖨 239 prints
License: Creative Commons — Attribution — Noncommercial — Share Alike ↗deskpencilpendesignvasemodepencilholder
Print profiles
Pencil_holder.3mfIN STOCKDEFAULT
⏱ 6h 26m · 158 g · 109 × 100 × 109 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print