This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the fireplace! Has a special stand/holder built in for an LED tealight so it can be illuminated on the tree. 

On top of that, there is a “Blank Fireplace for Litho Insert” version where you can create your own litho to snap into place! Whether it be a classic holiday movie scene, or a photo of your family simply create your own 40mm x 64mm x 2mm litho using your favorite lithophane generator and snap it into the space from the back of the fireplace! There are two optional lithophane models provided - one with a classic scene from Home Alone, and a second of Santa and his reindeer flying across the moon.

Use a standard LED tealight from Amazon to illuminate on the tree!

Print Settings:

Recommend minimum 3 perimeters and 15% infill. This will allow for lithophane section to be 100% solid, but remain efficient in other areas. Color of lithophane and model must be white unless using a multi material printer.
 

If printing your own lithophane dimensions are 40x64x1-2mm with frame of 2mm. Definitely print with a brim and stand on edge when printing. 0.4mm or smaller nozzle is best for fine details. Ensure printing at 100% infill or sufficient perimeters so that lithophane is 100% solid and does not contain any infill.