Model is best printed with the back of the house on the build plate. Supports will be needed only for the back since the roof has a slight overhang and that is the part that is directly on the build plate.
At 0.2mm layer height the window features have good depth.
I printed at 20% gyroid infill though you could certainly get away with less.
Mini House
by Mr. N · original on Printables ↗
World & Scans / Architecture & Urbanism
♥ 135⬇ 3.1k🖨 9 prints
Print profiles
stream table house v5.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print