I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips

What you need

Print Instructions

Choose between 10mm or 20mm plate
- Split / Delete / Copy / Paste / Merge objects you want
Filament: PETG, PLA (PRO)
Nozzle diameter : 0.40mm
Layer height: 0.20mm
Perimeters: 2
Brim: Maybe
Supports : Everywhere
XY Separation: 100%
Support Style: Snug
Infill: Gyroid 15%
Range Modifiers
- Perimeter: 3
- Infill: Rectilinear 100%
  - 10mm parts: Range 10mm - 20.8mm - 0.2mm
  - 20mm parts: Range 20mm - 30.8mm - 0.2mm

Note

You may need to resize the round spacer 104% to fit a genuine IKEA SKADIS board.
- You don't need to resize all the parts, just the round spacer

Change Log

2024-08-04 Change “Supports” to Everywhere
Removed the “Plates” and kept only the 3MF 10mm Wall Mount and Small Board

IKEA SKADIS Wall Mount

by DaHouzKat · original on Printables ↗

Household / Other House Equipment

♥ 401⬇ 2.1k🖨 5 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗wallmountskadisikeaskadis3mcommandstrips

Print profiles

Small_Board.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
3M_SKADIS_10mm_Wall_Mount.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print