🖨️ Print Shop
Christmas Tree Candy Dish v2

This tree has been printed with PETG and PLA without issue.  

  • The tree does not need any supports.  
  • The star will need supports.  I printed it in a few directions, I found the direction I have it was the easiest way to print the star.

The star will fit in the hole at the top of the tree.  Depending on your tolerances you may need a drop of superglue to hold it.

Print Settings

  • Layer Height – 0.2mm (or 0.4mm with an .8mm nozzle)
  • PETG or PLA
  • Infill — 15% 
  • Perimeters – 3
  • Top Fill Pattern – Rectangular
  • Bottom Fill Pattern – Rectangular

Christmas Tree Candy Dish v2

by EmbraceNext · original on Printables ↗

Seasonal designs / Winter & Christmas & New Year's

♥ 281⬇ 891🖨 9 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗christmasdishtreecandybowlcandydish

Print profiles

  • StarForTreeDish.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • ChristmasTreeDish.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print