Ornament for light chain

I created ornaments with family photos (lithophane) that attach to a light chain. I planned to add a few to the light chain each year.

Ornament with an iced tea light candle

I also created a second model so that the ornaments could be used on their own without the light chain. A 35mm or 38mm diameter led tea light candle will provide the light for the ornament.

!! I haven't had a chance to print the candle version yet. I cannot guarantee the quality of the model. I will try to provide photos or improvements as soon as possible (as soon as I am released from the hospital).

Litophane Maker url

https://lithophanemaker.com/Lithophane%20Tag.html

Printing settings

The ornament itself is printed without supports. Since the lithophane is printed in portrait, you will have to secure it with supports. The lithophane has a diameter of 60mm, but it is better to use 59,6mm values.

Ornaments:

material: PLA/PETG
wall-count: 2
infill: 10%
layer-height: 0.15

Litophane:

material: WHITE PLA
infill: 99%
layer-height: 0.12

Instructions for assembling the ornament and preparing lithophane photos.

Ornament for light chain

First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force

Step 1: Insert the lithophane inside the ornament into the groove

Step 2: Insert the second lithophane into the groove on the outside of the ornament

Step 3: Insert the light chain bulb into the hole in the ornament. Place the fuse on the light chain wire and insert it into the hole. Pull the light chain back a little.

First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force

Step 1: Insert the lithophane inside the ornament into the groove

Step 2: Insert the hook holder from the inside

Step 3: Insert the hook

Step 4: Light and insert the iced tea light

Step 5: Insert the second lithophane into the groove on the outside of the ornament

Circular Lithophane Maker is used to create lithophane

https://lithophanemaker.com/Lithophane%20Tag.htm

For greater lithophane strength, set at least a 2mm frame.

Insert a photo and set values similar to the picture... Litophane is printed vertically

Christmas ornament with photo

by RostaP · original on Printables ↗

Seasonal designs / Winter & Christmas & New Year's

♥ 241⬇ 524🖨 5 prints

License: Creative Commons — Attribution — Share Alike ↗christmasornamentchristmasornamentlitophane

Print profiles

ornament-led-chain.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
fuse.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ornament-led-candle (35mm candle).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hook.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hook-holder.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ornament - led candle (38mm candle).stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print