This is a print for a bracket to mount a hose. This is designed specifically for the ResMed Climate Line Air 11 hose but as most hoses are universally sized I'm sure this will work for most.

I included two prints, one has an inner ridge to prevent the hose from sliding and the second without to allow the hose to move.

I used a single #6 x ¾" screw to mount the bracket to the side of my nightstand.

Let me know if you have any ideas to make this print better and I can upload for everyone to enjoy.

CPAP Hose Bracket

by eroedig · original on Printables ↗

Healthcare / Home Medical Tools

♥ 415⬇ 1.7k🖨 20 prints

License: Creative Commons — Attribution ↗bracketcpapmountingbrackettubeholderresmedcpaphoseclimatelineair11

Print profiles

CPAP Hose Bracket.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CPAP Hose Bracket no inner ridge.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print