This model is a REMIX of 3Deddy's model from Thingiverse: https://www.thingiverse.com/thing:4148260
It's modified to fit the Prusa MK3S+ printer and it has several improvements:
Smaller base, so it can fit to the printer bed
Divided plate on the base, so you can print it directly on the bed and it will have a nice flat surface
Divided Dremel 4000 holder, so it can fit to the printer
Cap for the pipe
Modified kable guide
Print settings
PETG
0,2 mm
15% infill
Supports are needed for most parts
BOM:
Aluminum (or steel) pipe - 22 x 2 mm (cut 2 pieces: 350 mm and 250 mm)
625ZZ bearings - 5 x 16 x 5 mm (6x)
M5 Nuts (13x)
M5 Washers (11x)
Hex head screws:
M5 x 45 (1x)
M5 x 30 (6x)
Socket hex head screws:
M5 x 30 (3x)
M5 x 20 (4x)
M5 x 15 (1x)
Flat hex socket head screws:
M5 x 20 (4x)
M2 x 6 (1)
You can buy the parts from Accu Components: BOM
Assembly:
Mount plate to the base by 4 flat hex socket screws:
Mount 350 mm pipe to the base by M5 x 30 screws (3x), M5 nuts (3x) and washers (6x):
Assemble bearings and vertical guide by socket hex head screws M5 x 20 (4x), M5 x 30 (2x) and 6 nuts:
Mount 250 mm pipe to the Dremel holder by M5 x 30 screws (2x), M5 nuts (2x) and washers (4x):
Mount the top cap to the Dremel holder and 250 mm pipe by M5 x 30 socket hex head screw, then mount the cable guide by M2 screw:
Put a vertical guide to the pipe of the Dremel holder:
Assemble the vertical guide to the 350 mm pipe on the base by vertical guide lock knob, M5 x 45 screw, and nut. Then add a cap to the top of the pipe:
Glue together the lever and prepare the lock knob for the lever, M5 x 30 hex head screw, washer, and nut:
Assemble the lever (M5 x 15 screw):
Mount the DREMEL:
DREMEL drill press
by pejvl2000 · original on Printables ↗
Hobby & Makers / Tools
♥ 6.2k⬇ 8.3k🖨 22 prints
Print profiles
Plate.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cable guide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Knob for lever.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lock knob for lever.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lever.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Vertical guide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Vertical guide lock knob.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Dremel holder.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print