These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2) version.
The back-mount versions have blind hole with a diameter of 3.5mm (use M4 bolt or 4-4.5mm screw). The front-mount versions have a through hole with a diameter of 4.5 mm (use M4 bolt or 4-4.5mm screw). But be prepared to use a drill, these small holes tend to be smaller on printed part compared to 3D data.Â
The ribs are 0.8mm thick, which is just enough for two passages for standard 0.4mm nozzle.
Printing: Â Â I recommend 3 or 4 perimeters and brim (I used 3mm brim) to make sure it will stick to the bed better. I printed these with PLA, but you can go with other materials too. Btw Prusament PLA Blend Lime Green is awesome.
Tip: Use mirroring in the slicer to reverse the spiral of the ribs.
Also check out:
Soft touch knobs
by rorys3D · original on Printables ↗
Household / Home Decor
♥ 3.2k⬇ 5.4k🖨 93 prints
Print profiles
knob_B1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_B2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_E1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_D1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_E2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_A2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_D2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_C2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_A1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
knob_C1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print