Printer brand:      Printer:           Supports:    Resolution:   Infill:        Filament material:

Creality                Ender 3 Pro    Yes               .2                   40-60%  PLA+

Notes:

"Lug_Loid_Sized_Gun" is the model with the quick change
"Threaded_Loid_Sized_Gun" is the model with the threading already attached
"Loid_Forger_Gun" is the original model I made without any suppressor compatibility
"Loid_Pistol_with_Silencer" is the whole package, but its usually too large to fit on a normal print bed.

All models are printed with the barrel pointed up including the suppressor. I used brim adhesion for all models.

Set the Z scale to 113mm (the height of a PPK) For an Anya sized gun. Make sure any additional pieces are also shrunk down by the same percentage.

I saw on Reddit that Loid Forgers gun is a mashup between the Walther PPK and a German Luger 9mm. I found the 2 models, threw them into FreeCAD, and one crash course on FreeCAD and 3D Builder later we have this thing.

6/13/22 I added a model with the suppressor already attached, but the only variant that fits in my printer is the Anya sized model. I have not test printed that one.

7/14/22 I've now added 2 more variants of threaded barrel models and their suppressors in the correct heights so no scaling is required. The threading is NOT standard by any means. I just took the existing threading on the base model and stretched it. As of right now I have not test printed any of the new models, but I dont see why this wouldn't work.

10/27/22 After a LOT of trial and error, I have come up with a quick change and screw-on attachment system for a suppressor. It consists of the gun, a lug adapter, and the suppressor. I added a model with the threading already attached because its probably stronger. However, I like the quick change model as it doesn't change the side profile of the gun making it better suited for pictures. Both the lug and the threading are tightened by turning them clockwise while the gun is pointed away from you. I have test printed everything (a LOT) except the one with the threading because I literally just stuck the adapter on the digital model and called it a day.

Remixed from these sources:

https://www.thingiverse.com/thing:3546303

https://www.thingiverse.com/thing:1500383

https://www.thingiverse.com/thing:841060

https://www.thingiverse.com/thing:4257524