The original version can be found here. This version changes some proportions and adds a few details to be closer to reference material from the show.

This version uses printable pins for part alignment. The smaller pin is used for the hole in the top rail to index the barrel better.

The infill is up to you to determine how heavy the blaster is and where it is balanced. However, it is recommended that the barrel is not printed below 15% infill to help resist warping if using a heat gun later to speed along paint drying.

I printed everything using Overture PETG with the Prusament PETG .2mm speed profile.

For gluing up I used E6000 for the first time. This worked well enough but in places where I missed cleaning small oozing areas, they became rubbery blobs that were annoying to clean off later.

Arcane Jinx Zapper Blaster

by Photoroamer · original on Printables ↗

Costumes & Accessories / Props

♥ 656⬇ 3.4k🖨 21 prints

License: Creative Commons — Attribution ↗halloweencostumecosplayreplicapropvideogamegunpistolnetflixseriesleagueoflegendsarcaneloljinxnetflixseries

Print profiles

Jinx_Zap_Zap_Pin_Large.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jinx_Zap_Zap_Pin_Small.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jinx_Zap_Zap_Pin_Set.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jinx_scaled_capsule.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jinx_scaled_Left_part1.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jinx_scaled_Cannon_joined.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jinx_scaled_Right_part1.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print