Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs

I have also uploaded a Keymod AFG.

Although you can use this for non-standard or not-AR-15 handguards, I have uploaded a V2 AFG, which is an improved version of this one.

I made the lugs solid, as I've had the outline-style lugs shear off.

I used the Braudel T-Nut and Screw set. They are metric, not real M-Lok spec hardware, but significantly cheaper than the real thing and they work the same.
 

My Odysee page - https://odysee.com/$/invite/@Suburban:1

Print Settings

Printer brand:
Creality

Printer:
Ender 3

Supports:
Yes

Resolution:
0.2-0.24mm

Infill:
60%

Filament brand:
Overture

Filament color:
Black

Filament material:
PETG

Notes:
0.2 to 0.24mm layers
100% fan for bridging, 0% fan for everything else (PETG). If you have a really good cooling duct, you can maybe use less than 100% for bridging.
Use supports everywhere
60% or greater infill
Walls, top, and bottom should be 2.4mm or greater, as appopriate for your line width and layer height.