I made this 1/10th scale Pallet Jack with mechanical lifting.

Lifting or lowering by turning the M6 bolt by hand.

Will lift and carry at least 1,5kg.

Depending on the tolerances of your printer it may need some trimming and drilling out the holes.

The “Main Nut” should be only partly threaded or drilled to 5,5mm and forced on to the M6 screw and lock in place by friction.
This nut will be the part that bears the load when you turn the screw.

Hardware needed is:
1x M6x35mm Insex bolt
1x M6 Nut
2x M3x12mm (to fasten the front links to the frame)
2x M3x8mm (to fasten the front links to the height adjustment)
2x M3x8mm countersunk (to fasten the front wheels to the front wheel hub)
1x M3x6mm countersunk (to fasten the front wheel hub to the height adjustment)
Other sizes may fit, these are what I used.
No tapping required, the screws will make threads and lock in place.

The screws should not be tightened all the way but allow the parts to move.

All other links should have bits of 1,75mm filament as pins.

Choose between smooth or rugged front wheels.

Pallets and other accessories are uploaded seperately

EUR Pallet: https://www.printables.com/model/303460-110th-scale-eur-pallet

Stackable plastic container: https://www.printables.com/model/303463-110th-scale-stackable-plastic-container

Wooden crate with optional battery rack for AA and AAA battery storage: https://www.printables.com/model/313859-110th-scale-wooden-crate

1/10th Scale Lifting Pallet Jack

by MicceB · original on Printables ↗

Hobby & Makers / Mechanical Parts

♥ 3.4k⬇ 5.9k🖨 67 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗scalemodel

Print profiles

Rear link.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rear roller.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Main Nut.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Top Nut.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front link right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Height Adjustment.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front wheel smooth.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pushrod right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Pushrod Left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front wheel hub.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front link left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Chassis.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Front wheel rugged.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print