Modification to adjust the Focus on a Logitec C270 Webcam.
Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver.
Additionaly you will need 2x M3x8mm Screws to mount the Frontplate.
Filament: PETG, ABS, ASA
Layerheight: 0.2mm
Walls: 1.2mm
Infill: 20%
Logitec C270 - Focus Adjustment
by Printerfreak · original on Printables ↗
Gadgets / Photo & Video
♥ 136⬇ 1.1k🖨 48 prints
Print profiles
C270FocusRingBackplate.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
C270FocusRing.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
C270FocuserFrontPlate.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print