These are hooks for the IKEA SKĂ…DIS boards. Unlike others I have seen these are made to snap in to the board and won't come loose or wiggle around.
I am making models with different hook lengths available here, from 10 mm to 50 mm in 5 mm increments.
Some slicing and printing optimisations:
I got good results with a 0.4 mm nozzle and 0.1 mm layer height.
I print the hooks “lying down” on their side.
Since there are some round fillet overhangs I enable supports.
In order to have the strongest hook possible I want to have 100% infill, and all the print lines aligned with the shape of the hook. Usually the 100% infill is a rectilinear pattern, which I think won't be as strong. In order to have the lines of plastic aligned with the shape of the hook I increased the number of perimeters such that the entire print will consist of perimeters. In Prusa Slicer: Print Settings → Layers and perimeters → Perimeters.
IKEA SKĂ…DIS / SKADIS Hooks
by Kilian · original on Printables ↗
Household / Office
♥ 2.2k⬇ 12.2k🖨 192 prints
Print profiles
IKEA_SKADIS_Hook_10mm.stlIN STOCKDEFAULT
⏱ 4m · 1 g · 26 × 35 × 5 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_20mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_30mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_25mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_15mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_35mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_40mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_45mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
IKEA_SKADIS_Hook_50mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print