Wrapping paper cutter with an ordinary Snap-Off Utility Knife (9 mm)
Bring the paper cutter flush with the roll, gently press together so that the blade goes through the paper and simply pull (push) along the roll.
The blade is easy to change because the slide holds the blade.
Parts of the print as in the picture (standing).
Wall Line Count 5
Infill Density 30%
Inner diameter 60 mm
Length 50 mm
Print time: 4 hours
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Infill:
30%
Filament:
0 PLA
Notes:
Parts of the print as in the picture (standing).
Wall Line Count 5Infill Density 30%
Category: GadgetsXmas Wrapping paper cutter for break-off (Snap Off) blades
by TORX1 · original on Printables ↗
Seasonal designs / Winter & Christmas & New Year's
♥ 76⬇ 567🖨 10 prints
Print profiles
Wrapping_Paper_Cutter.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Wrapping_Paper_Cutter_slide.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print