Print the glass in clear PLA, and just drop it into the house body. Put some electric lights behind it for maximum spookiness!
No supports needed. Use 0.20 height for the glass; I used 0.20 for the house but should have gone with a higher thickness for speed. 15% infill. PLA works great.
There are thick versions of the house and glass as well. Be aware that the thicker glass will have two layers printed: light may spread differently than what you see in the photos here!
Do not put a fire inside your model! Use electric lights only.
Haunted House with glass
by neale · original on Printables ↗
Seasonal designs / Autumn & Halloween
♥ 415⬇ 1.1k🖨 39 prints
Print profiles
Haunted House Glass.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Haunted House.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Haunted House - Thick.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Haunted House Glass - Thick.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print