I buy cheap reloads in bulk, which come loosely packaged. To transport my ammo I needed some kind of box, which is why I decided to design one.
I designed this fully parametric in Fusion 360, which allows any caliber to be inputted. I have already added a vast array of calibers by now.
If you don't have Fusion 360, just drop me a comment with your parameters and I might add your requested stls.
To build this, you need to print one lid, the desired amount of boxes (the stls are all 5 x 10 rounds), 4 latch cams and 4 latch arms per box. Also you need M3x25 screws and nuts (I used and recommend self locking).
New print in place latch design!
The new latch design can be printed in one piece and makes opening and closing much easier. It replaces both the latch cam and the latch arm and latches directly onto the top screw. The number of screws you will need is the same as is the distance of the latch mechanism. So you can always retrofit already printed boxes with the new latch. In Prusa Slicer be careful if “detect bridging perimeters” produces unwanted results and fuses the mechanism. I had to turn it off to get it to print properly.
The original latch system was inspired by the x82nets Waterproof Box (https://www.thingiverse.com/thing:4838803)
For .22LR:
The standard latch arm will not have enough clearance. If you are planning to print the .22LR box you should use the trimmed arm by Benjamin King: https://www.printables.com/model/420483-22lr-ammo-box-latch-trimmed. Many thanks to him for pointing that out and providing a fix. The new print in place latch should be compatible with .22LR, as it is shorter. I have not physically tested that though, so feedback would be appreciated.
Change Log
- Added 7.62x39
- Added 7.62x51 NATO / .308 Winchester
- Added .40 S&W
- Added .22LR
- Added STEP files
- Added parameter wallCrateHeight
- Made divider size clearer
- Cleaned up file and added new latch design
Print Settings
Latch Cam and Arms
- Layer Height: 0.15mm
- Support: No
- Infill: 100% (shouldn't matter)
- Wall Line Count: 8
- For print in place variant maybe turn off “detect bridging perimeters” in Prusa Slicer
Box
- Layer Height: 0.2mm
- Support: From Build Plate
- Infill: 100%
- Wall Line Count: 6
Lid
- Layer Height: 0.2mm
- Support: From Build Plate (none if you flip it)
- Infill: 15 - 20%
- Wall Line Count: 2 - 3
Stackable Ammo Box Parametric
by black.bunny · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 326⬇ 1.8k🖨 8 prints
Print profiles
Ammo_Box_223.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_22LR.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_40_SW.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_45_ACP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_308_Winchester.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_357_Magnum.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Latch_Cam_Old.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_45_ACP.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_FN_5.7x28.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_9mm_Para.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_270_Winchester.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_357_Magnum.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_223.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_270_Winchester.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Latch_Arm_Old.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_22LR.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_7_62x39.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_7_62x39.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_9mm_Para.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_40_SW.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_308_Winchester.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_FN_5.7x28.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_243_Winchester.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_243_Winchester.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid_338_Lapua.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Ammo_Box_338_Lapua.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Latch print in place.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print