If you want to mount your gopro or other type of action cam with a gopro mount to your 3D printer frame for some timelapse video, then this is the mount you should choose.

There are currently 2 versions, straight version and a round version with 45 degree tilt.

What you need:

A set of thumb screw.

2 M3 bolts/screws and a holding nut.

Feel free to visit my github repo for more design. I use FreeCAD for designing so you should get the original design and do changes easily. https://github.com/t-liu93/Home-Improvement-Mechanical-Design

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

50%

Filament: DevilDesign PETG Transprant

Notes:

You can use PLA for that but if your printer is in a closure and you are printing ABS or PETG with very high bed temperature, then choose a more heat resistant material.

I used 50% infill but I think less should also work. Category: 3D Printer Accessories