Stand for Alexa Echo Dot 4
For the standard version you need support under the belly and the head.
Because you could still see, where the support was, I redesigned the model.
The divided model only has support on the “inside”, where the echo dot will cover it
Just print like on the screenshot, the body upside down and the head in an angle, with the connecting side facing down
Afterwards remove the pads on the body, which were for better adhesion and connect both parts with a M3x12 or similar screw

Echo Dot 4 Stand Alexa Mount Hippo, NEW divided version for easier printing

Hobby & Makers / Electronics

♥ 523⬇ 3.3k🖨 49 prints

Print profiles

Echo_Dot_Stand.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hippo_body.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hippo_head.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print