This is a laptop stand/riser that's ultra portable and easy to print.

Tested on Asus G14. Should work for most laptops.

• Print time about 1:30 h (for the pair)
• I've printed mine using PLA 0.25mm, 20% infill (default Prusa slicer profile for Prusa mini+)
• They can clip onto each other so you don't lose one
• You can print it with 0.6mm nozzle with 0.4 layer and 3 perimeters and it's gonna print beautifully without any infill but they won't clip in tightly. 
• You can add an rubber band so they don't slip on the table

You can check the model out on https://cults3d.com/en/users/maxx1313/creations if you wanna support me.