Gaggiuino - Gaggia Classic | Pro Touchscreen Housing and Funnel Plate Mount

Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised)

Fasteners (to attach touchscreen housing):

2 M4x10 button-head screws
2 M4 nuts
Loctite 242/243 or equivalent

Recommended Print Settings:

PETG or PLA, 0.4 mm nozzle, 0.2 mm layers, 20% infill, no supports needed

Attaching the lid:

Cut a piece of 1.75 mm filament with 5-10 mm extra length and use a heat gun to straighten if necessary
Thread filament through the plate and lid holes and check that the lid rotates freely
Melt one end of the filament to the plate with a soldering iron
Cut the other end of the filament so there's about 1 mm extra sticking out of the plate to melt
Melt other end of the filament to the plate with a soldering iron.
File melted areas flush if necessary.

Quick Note:

This design is ready to jump off of a 3D printer and into your espresso machine (with a bit of help from you). If this is your first exposure to Printables I'd like to encourage you to make an account, like & download the Gaggiuino models to increase the project's visibility, and check out the great Printables community!

Credit:

Credit to LikeableBump for the model designed for Gaggia Classic Pro (Gaggiuino - Arduino & Touchscreen Housing for Gaggia Classic & Classic Pro v2 by LikeableBump - Thingiverse). I wanted better fit, strength and printability as well as compatibility with the Gaggia Classic

Gaggiuino - Gaggia Classic | Pro Touchscreen Housing and Funnel Plate Mount

by Loogle · original on Printables ↗

Household / Kitchen

♥ 251⬇ 5.6k🖨 24 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗gaggiuino

Print profiles

housingback.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
housingfront_revised.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
plate_GC_revised.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
lid_revised.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
plate_GCP_revised.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print