This is a slingshot. Its has been tested and it works like a charm. It also is dead accurate. Print this with 70% infill to guarantee required strength.

For the Flatband Holders use 100% infill. These should be rock solid. Do not over tighten.

It works perfectly with 0.60 flatbands.

2x 5mm 35mm long allen screws with nuts are required. Do not ovetighten to avoid damaging the slingshot or the holders.

Slingshot

by Charles Coonz · original on Printables ↗

Sports & Outdoor / Outdoor Sports

♥ 280⬇ 2.2k🖨 21 prints

License: Creative Commons — Attribution — Noncommercial ↗slingshotsharpshooting

Print profiles

Slingshoot.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Flatband Holder 060.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print