🖨️ Print Shop
10in Home Server Project

I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA 

The Lenovo thinkcenter shelf needed to be split to be printed so i included both files(solid and front panel separate for size constraints

everything else was design and print as I went, everything is really beefy on the design front so shelves don't sag at all(aka way over engineered and thicker than needed)

As with anything its a complete work in progress forever and i learned a lot on the way and will continue to tinker with it and allow it to grow 

please leave any feedback as its much appreciated 

The rails came from Penn Elcom Penn Elcom 6U Full Hole Rack Strip with Square Holes 2mm/0.08" R0863/2MM-06 PennElcomOnline.com

i used standard cang nuts for the front and then ran out so i made my own version and used machine screws for the back no. 8 x ½ that thread right into the mount

Some inspiration from Marius Bach thingiverse link 10 inch rack project by mariusbach - Thingiverse

Ethernet plugs from MajorOCD Ethernet Plug by MajorOCD | Download free STL model | Printables.com

Updates

12/10/22 - 

  1. Added side fan mount for 120mm AC Infinity S3-P fan
  2. Added Pi Shelf
  3. Added Pi Shelf Keystone  
  4. Added Back Panel with cable slots 
  5. added more pictures of final product and during the build process

12/13/22- 

     1.Added .Step files for use in fusion 360 

2/1/23

  1. Added Fan Mount (4x Noctua 40mm)
  2. Added Air deflector ( total Prototype to push airflow up, Mounts on PDU with 2 sided tape) 

7/4/23

Uploaded a 5U rack rail for anyone who doesn't have rails available 

10in Home Server Project

by Chris · original on Printables ↗

Gadgets / Computers

♥ 496⬇ 2.3k🖨 9 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗switchcomputernetworkserverrack10inchhomelab10inrackmount

Print profiles

  • Rack Side Panel.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Rack Foot.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Panel Mount for Server Rack Rails.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Lenovo Thinkcenter Shelf.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • 1u 10 in Blank Panel.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Netgear GS308E Rack Mount.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Lenovo Thinkcenter split rear.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Lenovo Thinkcenter Split front.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Fan Mount.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Pi Shelf Keystone.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Raspberry Pi Shelf.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • 1U Back panel with cable slots.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Air Deflector.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Fan Mount.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • 5U Rail.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print