Sunglasses holder (for Honeycomb Storage Wall)

This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP

Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store some sunglasses.

Since I already had a bunch of base parts (insert-empty.stl or any of the other available over at RostaPs model files) ready to go, I took the easy route and used a little bit of superglue to join the two pieces together. It has the added benefit of being easier to print and also allows for using separate colors for the insert and the holder. Depending on how tuned our printer is, it's also possible that it will just be a press fit.

There is two lengths (40mm and 55mm) available, in case you happen to have sunglasses which require a bit more room. You can simply test this beforehand with a ruler:

Sunglasses holder (for Honeycomb Storage Wall)

by DusBus · original on Printables ↗

Household / Other House Equipment

♥ 404⬇ 1.8k🖨 34 prints

License: Creative Commons — Attribution — Noncommercial ↗holdersunglasssunglasseshoneycombshadeshoneycombstoragehoneycombstoragewallhoneycombwall

Print profiles

sunglasses_40mm.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
sunglasses_55mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print