v17: Fixed issue with lid grips not changing when the lid height is changed.

A simple screw top container made in fusion 360.

Print at 0.2mm layer height if you are using the default thread parameters (0.75mm).

I recommend printing out some small containers (20mm wide, 10mm tall) as a test and adjust the tolerance if needed before printing any larger ones.

I printed them in PLA with a 0.2mm tolerance and 1.2mm thick walls and they seem to be waterproof. This may be different on other printers and materials though.

Parametric Screw Top Container

by jq910 · original on Printables ↗

Hobby & Makers / Organizers

♥ 146⬇ 2.0k🖨 15 prints

License: Creative Commons — Attribution — Share Alike ↗parametricorganizerstoragescrewsmallpartsstorage

Print profiles

Lid.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Container.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print