UPDATE: I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the no-magnet-holes version of the STL is the one I recommend you use.
Features:
- Can contain approximately 3 standard packs of post-its
- Gaps arounds sides so that you can easily remove the packs of post-its
- Gaps also save filament and print time
- A bit of wiggle room, for comfort
- Can also receive another 2x2 module on top of its very self
Gridfinity post-it sticky notes stack container
by Jake · original on Printables ↗
Household / Office
♥ 466⬇ 3.6k🖨 59 prints
Print profiles
gridfinity post-it stack.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
gridfinity post-it stack-no-magnet-holes.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print