Small watering can for office indoor plants.
No supports needed.
To ensure that the can is waterproof, print the model with min. 8 layers for the bottom and min. 8 layers for exterior and interior wall thickness.
as always with PLA the waterproofing is a problem. therefore I recommend to set the infill to 100%.
I scaled up the watering can in the photos by about 10% with the Prusaslicer. The model for downloading is only suitable for small plants. For larger plants I recommend the model to scale up a little before slicing.
watering can
by swissmineral · original on Printables ↗
Household / Outdoor & Garden
♥ 417⬇ 4.0k🖨 87 prints
Print profiles
Watering can I.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Watering can ROTOR Design.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print