Update 16.04.2020: found on Youtube a track with the curves
I've seen some curve tracks, printed and tested them.
Then there were some thoughts in my mind, which curves, with which radius and angle,
will be possible and useful, and can I increase the grade (angle of slope) .
After a while I find a schematic which curves are possible, but not a lot of them are useful.
Nontheless, I designed, in my available CAD, a custumized curve, to switch
between curve size, angle and grade.
The four curves I loaded up, are the useful ones for me.
(There is a picture that shows the possible curves to choose)
The end of the curves are designed a little bit stiff, so they fit a little bit strong into the plates.
But so the Curve 1x120, 1x240 and 6x60 can be used without support.
The Curve 2x180 need some support, like shown in the picture, or it will tip over.
They all have a "angle of slope" about 35 degree, so the marble can went troug with
some high speed. (see Video)
See also my S-Curves here.
Update 04.05.2019: I added 2 more: 2x60 and 2x120
Update 18.08.2019: all the curves are now available with 2 "angle of Slopes" , 0 and 35 degrees
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Yes
Supports:
Yes
Resolution:
0,1
Infill:
20
Filament: enotepad PLA wood
Category: Toys & Games
Kurven for a marble run
by MK_Design · original on Printables ↗
Toys & Games / Outdoor Toys
♥ 296⬇ 2.6k🖨 44 prints
Print profiles
Kurve_1x240_Schraege_0deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_1x120_Schraege_0deg.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_1x120_Schraege_35deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_1x240_Schraege_35deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_2x60_Schraege_0deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_2x120_Schraege_0deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_2x180_Schraege_0deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_2x60_Schraege_35deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_2x120_Schraege_35deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_2x180_Schraege_35deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_6x60_Schraege_0deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_3x120_Schraege_0deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_6x60_Schraege_35deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Kurve_3x120_Schraege_35deg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print