A small, strong case with a collection of optional inserts for different uses.

Case

Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.

This can be a standalone case or you can add inserts for more functionality. As requested, I have included the following lids with text to label the contents of your case:

Blank Lid (default and easiest to print)
AA Lid
AAA Lid
9V Lid
Digital Media Lid
Nozzle Lid

Print Settings

Base and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid. The combined print time was just over 3 hours for me.

Optional Inserts

Battery Holders
- AA Holder - fits up to 6 AA batteries
- AAA Holder - Version 1 fits up to 6 AAA batteries, Version 2 (currently untested) holds up to 8 batteries
- 9V Holder - fits up to 2 9V batteries
Digital Storage Holders - Can be used together or separately
- MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section
- SD Card Holder - fits up to 6 SD cards in the upper section
Dividers
- Full Divider - Splits the entire case into 2 compartments
- Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider
- Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider
Nozzle Holders - Can be used together or separately
- Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
- Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)

Print Settings

No special print settings are needed for any of the inserts. I used 2 perimeters and 10% infill. Print times range from 35 minutes to 2 hours, depending on which insert(s) you choose to use.

More inserts from other users can be found here.

Buy Me A Coffee

The following filaments were used in the pictures above:

Black Case

polymaker PolyTerra Charcoal PLA
Hatchbox Sparkle Gray PLA

Red Case

polymaker PolyTerra Army Red PLA
polymaker PolyTerra Lava Red PLA

Yellow Case

PrintBed Yellow PLA
polymaker PolyTerra Banana PLA

Teal Case

polymaker PolyTerra Arctic Teal PLA
PrintBed Baja Blue PLA

Purple Case

Prusament Galaxy Purple PLA
Fillamentum Lilac PLA

Orange Case

CC3D Flame Orange PLA+
Inland Orange PLA

Green Case

PrintBed Green PLA
polymaker PolyTerra Forest Green PLA

Blue Case

GIANTARM Matte Navy Blue PLA
polymaker PolyTerra Sapphire Blue PLA

Multi-Use Case with Inserts

by JamesThePrinter · original on Printables ↗

Hobby & Makers / Organizers

♥ 6.7k⬇ 16.3k🖨 389 prints

License: Creative Commons — Public Domain ↗boxorganizerfunctionalaasdcasecontainernozzleaaasdcardmicrosdsdcardholderpracticalprintpracticaldividernozzlesnozzleholdere3dv6usefulrigidbatteryholderdividerspracticalprintingaabatteryaabatteryholder9volt9vbatterycase9vholderfunctionalprintmicrosdcardholderheavydutybatterycasestrongaaabatteryaaabatteryholdermicrosdholdermultifunctionruggedcaseruggedaaabatterystorage9vbatterysdcardcaseaaabatterycasemultifunctionalmicrosdcardcasepracticalprintspracticaldesignaaabatteryboxaaabatteriesnozzleboxmicrosdcard9v9vbatterystorage9vbatteryholdersdcardorganizermultiuseconvertmicrosdcasemk8nozzleaaaboxaaboxstrongboxmicrosdorganizerruggedboxheavydutyboxstrongcaseheavydutycontainerheavydutycaserigidboxaacaseaaacasee3dv6nozzle

Print profiles

Base.stlIN STOCKDEFAULT
⏱ 45m · 23 g · 61 × 47 × 45 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
9V Insert Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Upper Divider Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AA Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Upper SD Card Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lower MicroSD Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lower Nozzle Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Upper Nozzle Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lower Divider Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
FullDivider.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Lid.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Labeled Lid - 9V.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Labeled Lid - Nozzle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Labeled Lid - AAA.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Labeled Lid - AA.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Labeled Lid - Digital Media.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAA 6 Battery Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
AAA 8 Battery Insert.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print