🖨️ Print Shop
Print In Place Tensegrity

Here is my take on the tensegrity table, a print in place version !

To tension the mechanism, turn the little nobs in the center using pliers

I recommend printing the file with built-in support, they are very easy to remove

Printed fine on my Prusa Mini at 0.25mm layer height with cheapo PLA

Print time laps courtesy of @resyekt :

Print In Place Tensegrity

by rcmz · original on Printables ↗

Toys & Games / Puzzles & Brain-teasers

♥ 9.9k⬇ 37.6k🖨 123 prints

License: Creative Commons — Attribution — Noncommercial ↗printinplacetensegrity

Print profiles

  • printinplace_tensegrity_withsupport.stlIN STOCKDEFAULT

    ⏱ 6h 17m · 232 g · 165 × 105 × 105 mm · 1 material(s)

    Prints on: A1 mini 0.4PLA

    Order this print

  • printinplace_tensegrity_withoutsupport.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print