Based on this thing: 213946.

I separated each individual part and customized the text to be blank.

You can print the individual parts in any color. Printed in 0.2 PLA with 20% fill and 4 perimeters. No support needed. Added a tiny bit of grease on each pin before inserting.

You need 8 pins, 4 small gears, 4 big gears, and 1 center piece. Pop all 8 pins into the center piece. The larger gears go on the large face of the center part. Make sure when popping the gears onto the center, you line them up to be a cube. Once assembled, you can spin freely. The more you spin it, the easier it will get.

Cube Gear

by cusojr · original on Printables ↗

Learning / Other 3D Objects for Learning

♥ 699⬇ 4.4k🖨 140 prints

License: Creative Commons — Attribution — Share Alike ↗gearcube

Print profiles

pin.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
small gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
center.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
big gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print